Victory Riders Network

The online community for riders & enthusiasts of Victory Motorcycles

Anyone had experience with installation of Vance and Hines pipes and the subsequent tune? I have a pair of short radius (LOUD) pipes on their way and I am fitting to my 08 Vegas. I have spoken with the dealer and they say a tune is NZ $400, then I spoke with an Australian service manager who said I may not have to do much in the way of tuning. I have heard that if you disconnect the oxygen sensor on the exhaust it richen it up a bit and that sorts most of the problems.....any clues?

Views: 130

Reply to This

Replies to This Discussion

If the bike has been tuned with stage one victory pipes,not the standard pipes that come with a new bike, you shouldn,t have a problem with the short radius pipes.

I put a pair of Freedom sweepers i purchased of Rollies in Brisbane on a Vegas that was allready tuned to stage one pipes.

No problem, that is 10000 kms later.

 

I wasn't aware V&h made exhausts for victory's? Ive looked on their website and nowhere mentions victory's, have you got a link?

They are not V&H, pipes Freedom pipes.Conquest customs.com.

For some reason i couldn,t copy the link.Just look up Conquest customs.

If the bike is tuned to stage one {not standard] the aftermarket pipes should work fine.

RSS

Events

Victory Riders on Facebook







Follow The Victory Riders Network on Twitter



Get notification of the latest activity happening on the Victory Riders Network or any of the model specific sites in one place.
www.twitter.com/vrnetwork

 

Members

© 2020   Created by Victory Riders.   Powered by

Badges  |  Report an Issue  |  Terms of Service