Victory Riders Network

The online community for riders & enthusiasts of Victory Motorcycles

Hi Guys,

Does anyone know a site where to buy lowering links for a 2012 Highball?

And has anyone done it in there garage, and was it easy?

I wanna buy them and do it myself as i cant imagine changing a linkage with 2 bolts would be difficult

Views: 468

Reply to This

Replies to This Discussion

I know that secretly you all want a Vegas LOW   ( LMFAO )

 

Hey Al,

I can change the linkages easily, even with the fact i dont have a bike stand, Ill wrestle it onto a milk crate or something backyard style. I have been told belt needs tighteneing . But i guess theres only one way to find out.

It's not tightening the belt that's the concern.

Just see if the belt is rubbing on the inside cover of the drive pulley cover and if it is then just take off the cover a give a little grind.

Good luck

AL

This is how I secure my bike when it's up on a jack: need to put rear wheel up on two by six because my jack won't fit under engine when wheel is on floor.  A trick I learned from a Victory mechanic was using tie-downs from the handlebars to the wall on each side.  Bike cannot fall over this way.  Safety first.

Note: front tire is right up against the wall stud.

RSS

Events

Victory Riders on Facebook







Follow The Victory Riders Network on Twitter



Get notification of the latest activity happening on the Victory Riders Network or any of the model specific sites in one place.
www.twitter.com/vrnetwork

 

Members

© 2020   Created by Victory Riders.   Powered by

Badges  |  Report an Issue  |  Terms of Service