Victory Riders Network

The online community for riders & enthusiasts of Victory Motorcycles

Hey all,

I bought a set of aftermarket indicators for my 14 Highball

I fitted up the fronts with resistors and left the rear standard to test.
RHS front and rear worked perfectly however the LHS don't work at all, front or rear.

I noticed the LHS front has a reversed polarity connector on it after I tried to run it.
I'm guessing I've blown a fuse but the lighting fuse is still ok as it's the same fuse for all indicators and running lights and you can also hear the relay clicking
Is there an inline fuse or something I have missed that isn't in the fusebox?

Any help would be greatly appreciated.


Views: 116

Reply to This

Replies to This Discussion

leds only work one way.......... positive must be positive hence the name diode current only flows one way.....ya can check with 5 dollar test light,



Victory Riders on Facebook

Follow The Victory Riders Network on Twitter

Get notification of the latest activity happening on the Victory Riders Network or any of the model specific sites in one place.



© 2020   Created by Victory Riders.   Powered by

Badges  |  Report an Issue  |  Terms of Service