Victory Riders Network

The online community for riders & enthusiasts of Victory Motorcycles

Is it possible to move my handlebars 4 inches back? Must I change cables?

Views: 68

Reply to This

Replies to This Discussion

The cables might work but the brake lines I'm sure will not.
Thank you
I replaced my risers and all lines fit, the brake line is too tight. I need info on changing that. Can the top portion be changed or do you have to change the whole line??

Follow your brake line from the master cylinder down to where ever it goes and see if it screws into a T or a junction block.If so then you can do just the top line. If it goes to the brake then your going to have to get a hole new line.

Your dealer can order one from Barnett or you can it might not be the same color as you have now.

http://www.barnettclutches.com/products/cables.aspx

RSS

Events

Victory Riders on Facebook







Follow The Victory Riders Network on Twitter



Get notification of the latest activity happening on the Victory Riders Network or any of the model specific sites in one place.
www.twitter.com/vrnetwork

 

Members

© 2019   Created by Victory Riders.   Powered by

Badges  |  Report an Issue  |  Terms of Service